Heating element for water heater is made entirely of stainless steel and it comes with DN32(1 1/4”BSP)thread.
In addition to this the element is supplied with a bake lite housing to protect the wires. It also comes with a PG-11 cable gland protector to prevent any water vapor. Detai Electric water heating resistance are ideal for direct immersion heating of liquids.
We now have 3kw/4.5kw/6kw/9kw/12kw element in stock. Please feel free to contact us and get a quote!
|Thread Size||DN32/1 1/4"BSP|
|Tube Length||230mm(Any other length available)|
Screw-in Plug Water Heater Element are used for heating gases and liquids in tanks or vessels. These submersible heating elements have been designed so that heat transfer will occur at a rapidrate, enabling quick liquid heat up times. Typically they are implemented in the food and beveragindustry, laboratory clinics, applications involving hydraulic oils.
1. Lead time: 7-15 days after payment
2. Shipping Mode:Air, Sea, Express
3. Package: Carton box/wooden case
Notes for use:
Ø components should be stored in dry, if placed because of long-term and reduce insulation resistance less than 1 megohm, can be in around 200 ℃ oven drying several hours (or components of low voltage through several hours), if restoring insulation resistance.
Ø When carbon is found on the surface of the pipe, it needs to be used again, so as not to reduce efficiency or even burn out the components.
Ø When the solid oil such as melted asphalt and paraffin is used, the voltage should be reduced and then the rated voltage will be increased after melting.To prevent the power concentration from reducing the service life of the components.