Immersion heaters are used to heat many liquid substances like water, oil, chemicals and even to stabilize gas within their tanks. They are used in many industries within different liquid storing tanks, during the processing of pipes and in pressurizing the storing containers. Teflon coated immersion heater is made so as to withstand almost any environment and you can make use of it either in a pure water tank or under any acidic medium. Detai provide various type of material as per customer's requirements, such as stainless steel SUS304, SUS321, SUS310S, INOC800, INCO840,COPPER material, etc. Please feel free to contact us.
Product Details
| Material | SUS316 with teflon coating |
| Power | 220v 4500w |
| Tube diameter | 8mm |
| Tube length | 300mm |
| Thread | DN40/1.5"BSP |
Selecting the Correct Fitting Size
Installation
Certifications
Delivery&Package
1). Lead time: 7-15 days after payment
2). Delivery Term: DDU, FOB,CIF
3). Shipping Mode:Air, Sea, Express
4). Package: Carton box/wooden case
FAQ
Notes for use:
Ø components should be stored in dry, if placed because of long-term and reduce insulation resistance less than 1 megohm, can be in around 200 ℃ oven drying several hours (or components of low voltage through several hours), if restoring insulation resistance.
Ø When carbon is found on the surface of the pipe, it needs to be used again, so as not to reduce efficiency or even burn out the components.
Ø When the solid oil such as melted asphalt and paraffin is used, the voltage should be reduced and then the rated voltage will be increased after melting.To prevent the power concentration from reducing the service life of the components.
