Detailed introduction of threaded single-head electric heating tube

- Jun 24, 2019-

First, the application

Thread-mounted single-head electric heating tube structure: welded at the single-head electric heating tube connection part with a hexagonal head (for fastening) of different sizes (customized by the customer), which can be divided into hexagonal heads and It can be widely used to heat all kinds of liquid materials and can withstand pressure ≥0.8Mpa.

Second, the characteristics

The factors affecting the electrical strength of the electric heating pipe mainly include the thickness of the insulating layer, the quality of the raw material of the insulating layer, the length of the electric heating pipe, the radius of the bending and the number of bending.

Third, the working principle

When heating the air, the components should be evenly arranged, so that the components have good heat dissipation conditions, so that the flowing air can be heated sufficiently. The wiring part should be placed outside the insulation layer to avoid contact with corrosive, explosive media and water. The lead wire should be able to withstand the temperature of the wiring part and the heating load for a long time. When the terminal screw is tightened, avoid excessive force. The magnesium oxide powder at the outlet end of the electric heating pipe is protected from the infiltration of pollutants and moisture in the place of use to prevent the occurrence of electric leakage accidents.

Fourth, technical parameters

The following surface loads are generally referred to as metal mold heating and water heating can be multiplied by 2 to 2.5. Air heating is 50% to 60%