Small size and high power: The heating tube is mainly composed of bundled tubular electric heating elements. The heat response is fast, the temperature control precision is high, and the comprehensive thermal efficiency is high.
High heating temperature: The heater is designed for a maximum mission temperature of 850 °C. The medium outlet temperature is average and the temperature control accuracy is high.
Wide use and strong compliance: The heater can be used in explosion-proof or popular places. The explosion-proof grade can reach dIIB and C, and the pressure can reach 20MPa.
Long life and high reliability: The heater is made of extraordinary electrothermal data, with low design power load and multiple maintenance, which greatly increases the safety and life of the electric heater.
Fully active control: According to the requirements, the heater circuit design can conveniently complete the active temperature control of the outlet temperature, flow, pressure and other parameters, and can be networked with the computer. The energy saving result is obvious, and the heat generated by the electric energy is transmitted to the heating medium by 100%.
The fluid explosion-proof electric heating tube is a kind of energy-consuming electric energy converted into heat energy to heat the material to be heated. In the mission, the low-temperature fluid medium enters its inlet and outlet under the pressure effect through the pipeline, along the specific heat exchange flow channel inside the electric heating vessel, and uses the path of fluid thermodynamics design to take away the high-temperature heat energy generated in the task of the electric heating element. The temperature of the heated medium is raised, and the electric heater outlet obtains the high temperature medium required by the process. The internal control system of the electric heater actively adjusts the output power of the electric heater according to the temperature sensor signal of the output port, so that the medium temperature of the output port is averaged; when the fever element is overheated, the self-powered overheating maintenance of the heating element immediately cuts off the heating power supply. To prevent the heating material from overheating, causing enthalpy change, coking, carbonization, causing the burning of the heating element when severe, and extending the service life of the electric heater.