Electric heating tube sealing method

- Apr 19, 2019-

(1). The sealing is carried out according to the production order;


(2). Dig the MgO powder at both ends to a depth of 3 to 4 mm and clean it up. Pay special attention to the inside of the pipe and the threaded part.


(3). Check the component's withstand voltage 2000V/1s before sealing, no breakdown flash over, and insulation infinity;


(4). Into the sealing glue, should be rotated on the magnetic plug, then the nut and washer;


(5). The electric heating tube of the two ports shall be implemented in accordance with the operating procedures.