The so-called titanium electric heating tube is made of titanium tube as the outer shell, and the electric heating alloy wire is evenly distributed along the central axis of the tube. The gap is filled with magnesia sand with good insulation and thermal conductivity, and the ends of the nozzle are sealed with silica gel or ceramic. Highly corrosive liquid for metal electric heating elements. The titanium electric heating tube has the characteristics of simple structure, high mechanical strength, high thermal efficiency, safety and reliability, simple installation and long service life. Widely used in a variety of highly corrosive liquids.
Titanium is a metallic element, gray, with a melting point of up to 1668 ± 4 ° C. The density of titanium is 4.506-4.516 g/cm 2 (20 ° C). Titanium has no magnetism. Titanium can change the surface of titanium into color by temperature or voltage change. The plasticity of titanium is also very good, and various shapes can be processed. It can be burned in nitrogen and has a high melting point. Titanium and titanium-based alloys are new structural materials used primarily in the aerospace and marine industries. Titanium electric heating tubes are an emerging industry. Titanium electric heating tube will become a new economic breakthrough point in the jewelry industry, because titanium belongs to the new type of jewelry material, and it has its own "pro-biological" nature. In the human body, it can resist the corrosion of secretions and is non-toxic. It adapts to any sterilization method. It does not cause any harm to the human body when it comes into contact with the skin. In recent years, it has been gradually selected by many large brands at home and abroad.
Titanium heating tube use and description: Titanium has a small specific gravity, widely used in heating water, nitrate solution, acid solution, alkali solution, practice has proved that titanium in the production of anti-corrosion equipment, high efficiency, long life, application in electroplating equipment In the middle, does not affect the plating solution can greatly improve the efficiency of the plating industry. The effective length of the heating element must be fully immersed in the liquid for use.