Finned electric heating tube overview

- Jul 15, 2019-

It is made of high-quality stainless steel, modified yttria powder, high-resistance electrothermal alloy wire, stainless steel heat sink and other materials. It is made through advanced production equipment and technology, and has strict quality management. This series of products can be installed in the air duct. Or other static, flowing air heating occasions.


W-type fin electric heating tube parameters


The metal heat sink is wound on the surface of the common component, and the heat dissipation area is increased by 2 to 3 times compared with the conventional component, that is, the surface power load allowed by the fin component is 3 to 4 times that of the ordinary component. Due to the shortened length of the component, the heat loss of the component is reduced, and under the same power condition, the utility model has the advantages of rapid temperature rise, uniform heat generation, good heat dissipation performance, high thermal efficiency, long service life, small volume of the heating device and low cost. According to user requirements, a reasonable design is made for easy installation.


W-type fin electric heating tube advantage


The heat sink (fin type) heating tube has the following advantages compared with the ordinary heating tube. The heat dissipation area of the finned tubular electric heating tube is increased by 2.5 to 4 times compared with the ordinary light tube, and the surface load is lighter than the light tube. The increase is 2 to 3 times, and the heat loss of the heat sink is shortened, so that the heat loss of itself is reduced. Under the same power condition as the light pipe, it has the advantages of fast heating, high thermal efficiency and long service life; in a limited heating device, it can accommodate the total power of the super-light tube capacity of 2 to 3 times, greatly reducing the volume of the heating device. , saving the cost of users;


W-type finned electric heating tube product data


Dielectric strength: 2000V/min;


Insulation resistance >50MΩ;


Process: W-type finned electric heating tube is made by fins wound around the outer surface of the heating tube to dissipate heat.


Uses: It is used for oven and drying tunnel heating. Generally, the heating medium is air.


Products are widely used in machinery manufacturing, automotive, textile, food, home appliances and other industries, especially in the air curtain wind curtain industry.


(W-type finned electric heating tube products can be customized to meet customer requirements, providing drawings, voltage, power, size)