The silicone rubber heater has good waterproof performance and can be used in industrial equipment or laboratory pipes of wet and non-explosive gas. The heating, heat tracing and heat preservation of the tank and the tank can be directly wound on the surface of the heated part, and the installation is simple. ,Safe and reliable.
The product mainly consists of nickel-chromium alloy wire and insulating material, which has fast heating, high thermal efficiency and long service life. The electric wire is wound on the alkali-free glass fiber core frame, and the main insulation is silicone rubber, which has good heat resistance and reliable insulation performance. The silicone rubber electric heating belt is composed of an electric heating material and an insulating material, and the heating element nickel-chromium alloy belt has fast heat generation, high thermal efficiency and long service life. Coated multi-layer alkali-free glass fiber fabric with good heat resistance and reliable insulation properties. The product has good flexibility and can be directly wound on various heated devices, and is in good contact with the heated body, and the heating temperature is uniform. The silicone rubber electric heating can be wound around a pipe with a diameter of 35 or more. The heat-generating part should be in close contact with the piping. In this case, do not bend the electric heating part (thick part). When fixing the heater to the piping, use a silicone adhesive tape, a glass adhesive tape, or the like. The sensor is mounted on the surface of the heater and the temperature is directly controlled by temperature regulation. The oil drum heating belt varies according to the environment used, the material and shape of the heating object, and the temperature of the silicone rubber heating belt will change.