The titanium electric heating tube is made of titanium tube, and the electric heating alloy wire is evenly distributed along the center of the tube. The gap is filled with magnesia sand with good insulation and thermal conductivity. The ends of the tube are sealed with silica gel or ceramic. Highly corrosive liquid for components. Titanium electric heating tube has the characteristics of simple structure, high mechanical strength, high thermal efficiency, safety and reliability, simple installation and long service life. Widely used in a variety of highly corrosive liquids.
Titanium is a metallic element, gray, with a melting point of up to 1668 ± 4 ° C. The density of titanium is 4.506-4.516 g/cm 2 (20 ° C). Titanium has no magnetism. Titanium can change the surface of titanium into color by temperature or voltage change. The plasticity of titanium is also very good, and various shapes can be processed. It can be burned in nitrogen and has a high melting point.
Titanium has a small specific gravity and is widely used in heating water, nitrate solution, acid solution and alkali solution. It has been proved that titanium is highly efficient and has a long service life in the application of anti-corrosion equipment. It does not affect the plating solution in the application of electroplating equipment. Greatly improve the efficiency of the electroplating industry. The effective length of the heating element must be fully immersed in the liquid for use.