U-type finned heating tube

- Apr 22, 2019-

1. Product introduction

          It adopts high-quality stainless steel, modified yttria powder, high-resistance electrothermal alloy wire, stainless steel heat sink and other materials, which are metal-wound fins on the surface of ordinary components, which are made through advanced production equipment and technology, and have strict quality management. The finned electric heating tube can be installed in a blowing duct or other static, flowing air heating occasions.

2. Product advantages

          Compared with common components, finned electric heating tubes have a heat dissipation area that is 2 to 3 times larger, that is, the surface power load allowed by the fin elements is 3-4 times that of ordinary components. Due to the shortened length of the component, the heat loss of the component is reduced, and the utility model has the advantages of rapid temperature rise, uniform heat generation, good heat dissipation performance, high thermal efficiency, long service life, small volume of the heating device and low cost under the same power condition. According to user requirements, a reasonable design is made for easy installation. Products are widely used in machinery manufacturing, automotive, textile, food, home appliances and other industries, especially in the air curtain wind curtain industry.

3. Precautions

          (1) The voltage of this series of electric heating pipes shall not exceed 1.1 times of the rated value.

          (2) This product is a flowing air heating element. When working, the fan must first start the shutdown. When the heating tube is powered off, the fan delays for more than one minute and then the power is turned off.

          (3) This product is an electromechanical accessory and must be installed on a device with a grounding device!