1. Product Introduction
Cartridge heaters can be easily specified to meet the demands of special applications. For customized engineering or alternative options, contact your Detai sales representative for fast turnaround on your specifications.
The PTFE seal and leads protect the heater against moisture/contamination from lubricating oil, cleaning solvents, plastic material or fumes and organic tapes.
Please note when ordering this option, that a minimum no-heat section is required to allow for construction. Additional no-heat may be required to keep the seal below effective temperatures.
(1) Material: SUS304, SUS316, Incoloy800&840
(2) Standard Tube diameter: 8mm(diameter from 5mm to 25mm available.)
(3) Volt&Watt: 220v 200w
(4) Tube Length: 80mm(Any other length available)
(5) PFTE lead length: 300mm(Long leads are available)
3. Cartridge Heater Applications
Cartridge Heater Application
We recommend 10 watts per square centimetre when cartridges are to be immersed in water because the water removes the energy from the element very effectively. Commonly used as a chemical solutions heater.
Commonly used as engine sump heaters. When heating some oils, only 2 watts per square centimetre can be used otherwise the high cartridge heater surface temperature causes the oil to oxidise and carbon to be built-up on the surface of the heater. When this occurs, the carbon can thermally insulate the cartridge heater, causing the unit to heat up internally, often resulting in electrical failure.
Elements of approximately 1 watt per square centimetre are suitable for convection air heating, eg. Anti-condensation heaters.
Manifolds, hot runners and torpedoes.
Hot melt glue applicators.
4. Product details
1). Lead time: 7-15 days after payment
2). Delivery Term: DDU, FOB,CIF
3). Shipping Mode:Air, Sea, Express
4). Package: Carton box/wooden case
(1) What information do you need for quotation?
Watt&Volt(a must), length&diameter(optional, can be suggested by our engineers),Flange size, quantity& other specific requirements.
The single-head electric heating tube is also called a single-ended electric heating tube and a Cartridge Heaters. It is a kind of electric heating tube (tubular electric heating element). In the Chinese electric heating industry, there is a long-term model: M3. In the late 1990s, due to the wide application of electric heating tubes in China, the shape of electric heating tubes is also very large. In southern China, the electric heating tubes for such a outlet mold are called single-head electric heating tubes or single-ended electric heating tubes, which are very similar. of.